| Measuring Range |
-40°C ~ 300°C |
| Display Resolution |
0.5°C . 1°C for below -20°C and over 100°C |
| Measuring Accuracy |
When the ambient temperature is 25 ±2°C and the emissivity is 1, 0 ~ 300°C: bigger value of either of ±1% of the measured value ±1dgt or ±2°C ±1dgt.
0 ~ -30°C: ±3°C ±1dgt
below -30°C: ±5°C ±1dgt
|
| Repeatability |
within 1°C ±1dgt |
| Response |
1 sec(90% response) |
| Measuring Diameter |
(45mm/500mm(Optical sensitivity: 90%) |
| Collimation |
Before shipment: 0.95. The value can be altered between 0.8and 1.0 with the slide switch at the lower part of the battery compartment(by 0.05 steps).
Laser beam(650nm 1mW JIS class2)specifies the center. |
| Water-Proof Property |
IP67 |
| Auto Power Off |
If no key is pressed for 30 seconds, the power is shut off automatically. |
| Shock Proof Property |
This instrument or its function/performance will not be damaged even if it is dropped on the p tile floor from 1 meter high. |
| Operating Temperature |
0 ~ 50°C |
| Operating Humidity |
90% rH and below(no condensation) |
| Storage Temperature |
-20°C ~ 55°C(no condensation)(Note): In the case of longterm storage, the batteries should be removed. |
| Battery |
2 AAA alkaline cell batteries |
| Battery Life |
Approximately 10 hours for continuous use |
| Housing material |
ABS(antibacterial) |
| Dimension |
120 x 60 x 54mm(Maximum value for each direction) |
| Weight |
Approx. 123g |
| Accessories |
2 AAA Alkaline Cell Batteries
Instruction Manual
Strap |
| Approved Standard |
CE marking:EMI EN61326 Class B, EMS EN61326 Annex C
Stability:±5°C under EMC test environment at 25°C |
